dsh-prompt-setting

dsh-prompt-setting

English | 中文

System Prompt management for DSH (DeepSeek Harness). It adds a Prompt manager to the Web GUI's Settings: you can see the system prompt a session actually assembles on every turn, search it, write your own instructions into it, and roll back a bad edit — all without touching the global DSH install.

• Zero runtime dependencies, zero build step: one package of plain JS — nothing to fetch, nothing to compile.
• Upgrade-safe: configuration is written only to the plugin's own data directory, so upgrading or reinstalling DSH neither loses nor overwrites it.

---

1. What problem this solves

Every DSH turn is injected with a base system prompt assembled by @deepseek-ai/dsh-system-prompt. Until now the only way to adjust it was to hand-edit files inside the global pnpm node_modules. The cost of that:

• the next DSH upgrade overwrites it and your changes are gone;
• it pollutes a global install, so nobody else — and no other machine — can reproduce it;
• there is no record of what changed, or of what it looked like before;
• and worst of all, you cannot see what the finally assembled system prompt actually looks like.

This plugin moves that into the Settings page: the assembly is laid out section by section, the part you write is its own section pinned to the end, every other built-in section stays read-only, and changes come with history, diffs and exportable backups.

2. What you get after installing

Settings gains a "Prompt settings" pane (id: prompt-setting) with six top-level tabs:

All UI copy follows DSH's language setting: switch DSH to Chinese and this page turns Chinese, with no refresh or restart.

The tab bar itself. The six top-level tabs are plain text — no fill, no border, no equal-width columns. The selected one carries a short underline pressed against the faint rule under the bar, and the bar stays on one line, scrolling sideways when the panel is narrower than the labels (it never widens the page). 「My presets」shows its library size as (N) — and shows no number until that size is really known, so a placeholder (0) can never appear. 「Advanced」shows a small red dot while a newer release is on offer; dismissing the update banner does not clear the dot, because the dot states a fact while the banner is only a notice.

Network access: it checks for updates once (and you can turn it off)

When the settings page opens, the host (Node side) sends one GET to https://api.github.com/repos/zangxx66/dsh-prompt-setting/releases/latest — a URL derived from this package's package.json (repository.url), never hardcoded a second time. That is the plugin's only outbound request, and it is switchable:

• one request, nothing else: no body, no cookies, no local/session/workspace data; User-Agent: dsh-prompt-setting/<version>; a 5-second timeout; not repeated within six hours in the same process;
• it speaks up only for a confirmed newer release: a dismissible banner at the top of the page (the new version + a link to the release page). No update, no release yet, or a failed request shows nothing at all at the top of the page — no prompt and no error. "No release yet / unparsable tag" is a fact about upstream, so it gets one neutral line inside the Advanced switch card; a failed check does not get that line;
• turning it off: Settings → Prompt settings → Advanced → turn "Check for updates" off. With it off there are zero requests, including on page load, and <DSH_HOME>/prompt-setting/preferences.json records {"updateCheck": false}. Hand-editing that file — or deleting it to return to the default (on) — works the same way;
• what it never does: no automatic download, no automatic install, no automatic restart, and no DSH platform version check.

Installing the update ("Update now")

The version gets installed; the restart is still yours — and the page says how. The banner's Update now button opens a second confirmation (which says so), and on confirm the host installs that release's .tgz into the current profile through the official plugin manager. Afterwards the page answers for the launch shape it is talking to: a command-line host says "vX.Y.Z is installed — restart dsh web yourself", the official desktop app says "quit and reopen DeepSeek Harness" (a desktop user has no terminal, so dsh web never appears there), and an undecidable shape falls back to copy both readers can follow. Nothing here restarts anything.

• what it installs: the release asset https://github.com/zangxx66/dsh-prompt-setting/releases/download/<tag>/dsh-prompt-setting-<version>.tgz, with <tag>/<version> taken from the same update check — so the version announced is the version installed, and a cached check still costs zero outbound requests. Being an asset, it needs no pnpm build-script approval;
• how it runs: the click returns a requestId at once and the page polls it (1.5–5 s, up to 16 minutes) with a cancel button. A failure names its category (asset missing 404 / build blocked / network / pnpm missing / …) with a retry — never an automatic retry, never an automatic restart;
• a link: install is refused: a profile that holds this package as a link:/local path is a development working tree, so the button refuses and points at the manual route instead of overwriting that link with a published version;
• for releasers: every release must upload its npm pack asset, named exactly dsh-prompt-setting-<version>.tgz, and this package must not add postinstall/install scripts (a tarball carrying one is stopped by pnpm's build gate). See packages/dsh-prompt-setting/NOTES.md §107.

3. Installation

Prerequisites: DSH installed at >= 0.2.1-0 < 0.3.0-0 — every 0.2.1 prerelease (alpha, beta, rc.N, and the synthetic -0 floor), the 0.2.1 release itself, and every later 0.2.x patch (0.2.2, 0.2.9, …) are in range; the 0.1.x / 0.2.0 lines below 0.2.1 are out, and so is the whole 0.3.0 line and everything after it — the next minor has to be re-declared (tested) before it is admitted. Node >= 22 is needed only to run the tests or to develop.

The registry is the primary way in (this package is published; npm latest is 0.2.2 — this repository is 0.2.5, and the two meet when it is published):

dsh plugin --profile <name> add dsh-prompt-setting

The Web GUI's profile is web. The other three routes — git/GitHub, a local checkout, a tarball — are the development / offline / fallback ones. All four routes put this package into one DSH profile — the same profile files, the same package manager, the same log — so pick by what you have at hand. Do not hand-edit profile config files.

The GUI's own Plugins page (no terminal)

Current DSH carries a standalone Plugins page in the Web GUI sidebar. It is not under Settings — Settings → Built-in plugins is the read-only inventory, not an installer:

1. Sidebar → Plugins → Add plugin;
2. type the same spec you would hand dsh plugin add, then Install:
   • the registry name — dsh-prompt-setting (primary; pulls the latest version from npm);
   • a local path (development) — the absolute path of this repository's package directory: <absolute path to repo>/packages/dsh-prompt-setting (clone or download the repository first; a relative path is refused, because the host's working directory means nothing to a browser);
   • a git address (development / fallback) — github:zangxx66/dsh-prompt-setting#path:/packages/dsh-prompt-setting (the #path: part is required for this monorepo);
   • a tarball (offline / fallback) — dsh-prompt-setting-<version>.tgz, on disk or over http(s);
3. the Host reads the spec before anything installs (name, version, one-liner, whether the package really carries a bundle) and says so under the field instead of installing when it cannot; an accepted spec then streams pnpm's output behind Show install details, with Cancel install at hand, and a failed or cancelled run puts the profile files back;
4. a finished install offers Enable now; the bundle's own page carries its switch, its rows and uninstall. If pnpm blocked a dependency's install scripts, the failure screen lists the packages and offers Allow these scripts and retry.

A local path installs as a link: — the profile and your checkout become the same files. That is a development working tree, and the plugin's own "Update now" button deliberately refuses to overwrite it with a published version (see the "Update now" note above): update such an install with git pull.

If your DSH build has no Plugins entry in the sidebar, use the dsh command line below.

Hand the repository address to the agent in a session

Paste the address into a session and say what to do with it — the agent installs it into the profile that session is running:

install https://github.com/zangxx66/dsh-prompt-setting into this profile

In Creator mode the agent has the plugin_manager tool and calls it directly:

plugin_manager(action: "install_bundle", target: "github:zangxx66/dsh-prompt-setting#path:/packages/dsh-prompt-setting", enabled: true)

• the #path: part is required: this repository is a monorepo and the plugin lives in a subdirectory. Without it pnpm installs the synthetic 0.0.0 empty package rooted at the repository, and the plugin never shows up;
• what you are approving: an install rewrites the profile's package.json and bundle selection, and the installed Host code then runs in-process, outside the workspace sandbox — the tool therefore requires danger-full-access, or a per-call approval. Read the spec before approving it.

The dsh command line

dsh plugin --profile <name> <pnpm args…> runs pnpm inside that profile's directory and selects the bundle the run added. The Web GUI's profile is web:

# from the registry (primary)
dsh plugin --profile web add dsh-prompt-setting

# straight from GitHub — development / fallback; no clone first; the #path: part is required for this monorepo
dsh plugin --profile web add 'github:zangxx66/dsh-prompt-setting#path:/packages/dsh-prompt-setting'

# a local checkout — development (absolute path; installed as link:)
dsh plugin --profile web add '<absolute path to repo>/packages/dsh-prompt-setting'

# a tarball built from the package directory — offline / fallback; same behaviour
cd packages/dsh-prompt-setting && pnpm pack
dsh plugin --profile web add '<absolute path to the .tgz>'

pnpm ≥10 does not run a git dependency's build scripts by default, so a git install fails the first time and prints an exact package key (ERR_PNPM_GIT_DEP_PREPARE_NOT_ALLOWED); copy that key into the profile's pnpm-workspace.yaml under allowBuilds and re-run add. That grant means "this package's code may execute on your machine at install time", so grant it only to sources you trust and pin the commit (…#<sha>). This package is zero-build: prepare only runs a release self-check — are all declared entry points present, are they all inside the files allowlist, does every patch row resolve. To avoid the grant entirely, pnpm pack a tarball and add that instead; behaviour is identical.

Confirm it is mounted

Open the DSH Web GUI → Settings: the "Prompt settings" pane should be there. To confirm the host half is mounted, the page's "raw response" area shows the JSON returned by GET /prompt-setting/ping, or run await (await fetch('/prompt-setting/ping')).json() in the page console.

A bare curl against that route is rejected (401): it requires the browser's cookie authentication. That is expected behaviour and does not mean the route is missing. See NOTES.md §4.

Measured output, the full check table and the untested items are in NOTES.md §96; the package-level summary — what it is, features and install, bilingual — is in packages/dsh-prompt-setting/README.md.

4. Things to know (the easy-to-trip-on edges)

• When it takes effect: saved text applies from the next turn / next session; it never rewrites a turn already in flight.
• The write surface is narrow: only the "My Prompt" section is writable. Every other built-in section is read-only — PUT and the single-name DELETE return 403 write-locked (and touch not one byte of the files when they refuse). Since g-074 import is the one exception: a backup is the whole installation (every override of both layers, every registered workspace layer, the preset library, the preferences), and restoring it must not be blocked by the write face. That exemption costs no check — the document is validated at least as strictly as before, and a rejected import writes nothing (CONTRACT §11.1, §11.7, §15.7).
• Two layers: a user-level default plus a workspace-level override. Cover (the default) lets the workspace text replace the user text; Stack makes the workspace text follow the user text, one blank line apart, so both reach the prompt. Handy for "one global set, plus a few extra lines in this project".
• Installed but empty = not installed: with no text, the section contributes nothing to the final prompt and the rendering is byte-for-byte identical.
• Where the data lives: only the plugin's own data directory (one user-level and one workspace-level layer file, plus a history.jsonl).

"My Prompt" injects text — it is not a behaviour switch

• What it does is inject your text at the end of the system prompt, after every built-in section (measured on this machine: 100% present and 100% last across standard sessions since 2026-09-30 21:32). It is not a hard switch over model behaviour.
• Surface style — output language and the like — usually works. But the effect on reasoning / internal-thinking language is not reliable; the model and the platform decide. We measured visible Chinese output next to fully-English reasoning in the same session. That is not the same as "the plugin did not work".
• Two cases where it provably cannot take effect (keep them apart from "the model ignored it"): ① the session's agent preset declares complete: true (the built-in minimal, and this machine's "梁神模式") — the platform collapses the assembly into a single section, so this plugin's text cannot enter the final prompt, and the Settings page raises a blocking notice; ② the plugin is not loaded at all — a broken plugin never affects DSH startup, so the terminal is the only signal; run node scripts/check-compat.mjs first.

Prove it for this session (two paths plus a failure rule):

# Path 1 (hardest evidence): read this session's persisted final prompt
ls ~/.dsh/sessions                              # find your workspace dir (escaped; non-ASCII becomes ~XXXX~)
F=~/.dsh/sessions/<workspace-dir>/<session-id>/session.v4.jsonl.zstd   # e.g. --Users-me-Documents-proj--
zstd -dc "$F" | jq -r 'select(.type=="system/message") | .data.message.content[0].text[-200:]'

• Path 2 (GUI): Settings → Prompt settings → the "My Prompt" panel for the freeze warning, and the Advanced tab's status card for the freeze state and the build fingerprint (matches host / page is stale / unknown; "stale" only means the page is old — refresh).
• How to read the result: your lines at the end ⇒ injection is fine, and if the model does not comply the cause is model compliance or a frozen preset; no such lines (or an empty text) ⇒ check that session's agentPreset and freeze state first.

5. Repository layout

packages/dsh-prompt-setting/   # the plugin package (publishable to npm on its own)
├── index.js                   # host half: routes + assembly listeners + the reserved section
├── client.js                  # client half: the four Settings tabs
├── core/                      # pure-function kernels + the only module that touches the filesystem
├── cordis.patch.yml           # bundle patch (one insert row mounting both halves)
├── scripts/                   # check-compat.mjs (read-only diagnostic) + prepare.mjs (git-install gate)
├── CONTRACT.md                # the frozen REST contract (the client is written against it)
├── NOTES.md                   # design trade-offs, measurements, untested items
└── test/                      # eighteen test suites
assets/                        # the hero image for this README
.dsh-graph/                    # project board and event log (separate inner repo, not part of this one)
.worktrees/                    # isolated worktrees for subagents (not part of this one)

6. Development and testing

cd packages/dsh-prompt-setting

# syntax
node --check index.js && node --check client.js && for f in core/*.js scripts/*.mjs; do node --check "$f"; done

node --test                    # eighteen suites; the integration suite runs against the real DSH package and must pass (not skip)
node scripts/check-compat.mjs  # read-only compatibility self-check (no network, never throws, always exit 0)
node scripts/prepare.mjs       # the prepare gate pnpm runs on a git install (exit 1 when it fails)
npm pack --dry-run             # confirm the published artifact is clean (29 files, no test/, no .dsh-graph)

Latest run on this machine: node --test 740 tests, all passing, 0 skipped (31 of them in the integration suite); npm pack --dry-run reports 29 files (measured 2026-10-09).

Worth knowing:

• test/integration.test.mjs resolves the real @deepseek-ai/dsh-system-prompt and the real Cordis from your local DSH install root, and verifies assembly semantics (waterfall order, complete freezing, scope shadowing) in a real context — these conclusions are measured, not guessed — and the same conclusions are written into CONTRACT.md and the snapshot's experiments field.
• When the real package cannot be resolved, the suite skips, so node --test stays green on a machine without DSH; on a development machine you must see it pass, not skip — a skip means the evidence is missing.
• The tests need no browser: client.js runs inside a node:vm sandbox with require / React / fetch all stubbed, so "primitives available / unavailable" and "probe ok / HTTP error / network error" are all asserted offline.
• The tests never read or write your real ~/.dsh: the relevant suites point $DSH_HOME at a temp directory.

When the plugin does not show up after a DSH upgrade and the terminal says nothing, run node scripts/check-compat.mjs first — it prints the terminal signature of the four boot failure modes and the rescue steps. How a code change takes effect, and the maintainer commands, are in the package README's "For maintainers" section; the detailed measurements are in NOTES.md §91.

7. Design notes

• Visible: the host half calls ctx.systemPrompt.assemble({scope: agent}) and gets back the sections (sections[{name,text}]) plus the full text.
• Writable, without touching the core: it registers the official system-prompt/assemble waterfall hook and replaces / hides / appends by section name — no change to DSH's core, none to the global install.
• The plugin registers its own section: during apply it registers the reserved section prompt-setting:custom-prompt (empty text, interpolate: false); your text lands on that section through the override engine and is moved to the end of the final assembly by an outermost listener. interpolate: false is not a style choice: once user text takes part in interpolation, a single {{unknown-variable}} would make every later assembly throw.
• Layered so it can be tested: apart from store.js, everything under core/ is plain data in, plain data out; store.js is the only module that touches the filesystem, and it is not on the assembly path. Listeners on the assembly path r