dsh-mishu

dsh-mishu

提醒 通知 待办 收件箱 秘书 GitHub 邮件 飞书 Telegram · reminder notifications todo inbox triage secretary

中文 · English

---

中文

**DSH 小秘书，DeepSeek Harness（dsh）插件。**替你盯着 GitHub 通知，也记住你交代的事（账单、续费、证件到期、生日）。它会查清楚哪些事已经结束、替你关掉，只把真要你处理的留给你。

支持 macOS / Windows / Linux，界面中英双语。设计见 docs/调研与设计.md，需求全景见 docs/需求清单.md。

能做什么

GitHub 通知：每 15 分钟拉一次全部未读通知，查对象现在的状态再判断，不看通知文字。

几十条通知会合并成"事项"：同一工作流在同一分支上的失败算一件事，同一个 fork 的噪音也算一件事。

手动交代：在任何 DSH 对话里说一句，比如"护照 2027 年 3 月 10 日到期"或"每月 15 号交房租"。模型会整理出日期、重复方式和提前多久提醒，DSH 弹出审批卡片让你核对，你同意了才存。到了提醒那天，它出现在待处理里。你说办了，这一期就关闭，下一期按周期自动出现。

默认提前量：证件 90 天，账单 3 天，生日纪念日 7 天，续费续保 7 天，其他 1 天。

邮件：在设置页添加邮箱（QQ、163、126、Gmail、iCloud，或自己填 IMAP 服务器），小秘书定时看收件箱里最近的未读邮件。只读：以只读方式打开收件箱，只看发件人、收件人、标题和几个邮件头，不读正文，也不会把邮件标成已读。

同一封邮件的往来回复算一件事。你在邮件客户端里看过之后，对应的事项会自动关闭。

密码放在系统钥匙串：macOS 钥匙串、Windows 凭据管理器、Linux 密钥环（Secret Service）。密码只在设置页输入一次，直接交给钥匙串，不写进任何文件，接口也从不返回它。没有钥匙串的电脑（比如没有桌面的 Linux 服务器），密码和 token 存进记事本目录里的 secrets.json：权限 600，只有你的系统账号能读，但没有加密，设置页会写明这一点和原因。

添加邮箱：点"+ 添加邮箱"弹出向导。填了地址就自动选好服务商，显示去哪里开 IMAP、拿授权码，带"打开设置页"；授权码位数不对会提醒；"测试并保存"连得上才保存。

用法

看板：点 DSH 左侧栏的"小秘书"，打开整页看板。顶部是一句话总结和四个数字（要你处理、7 天内到期、今天替你关掉、待你核对），下面分三栏：

看板上方可以按来源筛选：全部、GitHub、邮件、交代。

• 要你处理：现在需要你的事。每张卡片写明是什么、问题在哪、怎么办（比如 CI 失败在哪个 job 的哪一步、上次成功是什么时候），主按钮直接打开该看的地方（"看失败日志""去关掉 Actions""去审查"），还有办完了、明天再说、忽略。
• 我记着：说过"明天再说"的事，以及还没到提醒时间的交代。底部可以直接交代新的事，填写时会实时显示小秘书理解成了什么。
• 替你办了：最近 7 天关掉的事，按理由分组。点"怎么回事"能看到它是什么、为什么关掉（附证据链接）、小秘书做了什么、来自哪几条通知。判错了就点"恢复"。

+AI：看不明白就点彩色的"+AI"。它会开一个新对话，把这件事的说明、链接和相关通知放进输入框（不会自动发送），你看过、补上自己的问题再按发送。看板上的每张卡片、顶部总结、来源报错、设置页里各邮箱服务商的开通说明都有这个按钮。对话里的 AI 可以用 mishu_detail 查一件事的完整记录；要改状态时会先问你。

卡片可以拖动：拖到"替你办了"就是办完，拖到"我记着"就是明天再提醒，从"我记着"拖回"要你处理"就是现在处理。三栏之间的分隔条也能拖动调宽度，双击恢复等宽。

设置：点页面顶部的"设置"：语言、各类别提前几天提醒、GitHub（开关、token 从哪来、测试连接、在 GitHub 上标已读的方式）、邮箱账户（添加、测试连接、现在收一次、编辑、删除）。飞书即将接入。

重启 DSH：页面顶部"设置"后面的按键。重装或升级插件后点它，桌面版会按正常方式退出（有任务在跑时会先问你），再自动打开。用 dsh-vps 装在服务器上的 DSH，由 dsh-gate 网关托管：点了之后 DSH 正常退出，网关几秒内把它重新拉起，页面断开一会儿后自动刷新。直接用 dsh 命令启动的 DSH 没法从页面重启（新的登录地址只会打印在那个终端里），按键会告诉你回终端按 Ctrl+C 再运行一次。Windows 和 Linux 桌面版的重启还没在真机上测过。

文字命令：

/mishu                 简报：要处理的、快到了的、最近替你关掉了什么
/mishu 同步            立刻同步一次 GitHub
/mishu 完成 12         把 #12 标为完成（还有：忽略 12、恢复 12）
/mishu 已关闭          最近 3 天关掉的事项和理由
/mishu 交代            你交代过、还在进行的事
/mishu 停止 3          交代 #3 以后不再提醒

英文命令也能用：sync、done、dismiss、reopen、closed、series、stop、help。

agent 可用的工具：mishu_add（交代，需要你审批）、mishu_list、mishu_detail、mishu_update、mishu_stop。

不会做的事

• 默认不在 GitHub 上标已读。markRead 默认是 shadow：只记下"如果打开，会把哪些通知标成已读"，一条也不真标。核对过 /mishu 已关闭 后，再改成 on。还在待处理里的事项，永远不会被标已读。
• **通知文字不会触发任何动作。**只看查到的状态。
• **你改过的状态，不会被同样的证据改回去。**只有来源出现更新的动态，才会重新判断。
• **你重新打开一件被规则关掉的事，算一次纠正。**一条规则关掉的事项满 10 件、被纠正的比例超过 20%，这条规则就降级：之后它的结论只给你看，不再自动关闭。
• **不动你的邮箱。**只读打开，不读正文，不标已读，不删不移，不发信。

GitHub token

按顺序取，token 不写进任何文件：

1. 环境变量（默认 GITHUB_TOKEN）
2. 在设置页"用 GitHub 登录"拿到的 token（GitHub 设备登录：显示一个登录码，你在 github.com/login/device 输入并授权，手机或别的电脑上都行），或者你粘贴的 token：先拿到 GitHub 上检查，再存进系统钥匙串（没钥匙串时存进 secrets.json）。要用 classic token，勾选 notifications（看私有仓库再勾 repo）；GitHub 的通知接口不认 fine-grained token
3. gh auth token：装了 GitHub CLI，并运行过 gh auth login 就行。从 Dock、开始菜单启动的 DSH 拿到的 PATH 往往很短，所以小秘书除了 PATH，还会去 Homebrew、~/.local/bin、winget、Scoop 等常见安装位置找 gh

安装和配置

dsh plugin --profile <name> add dsh-mishu

在 profile 的 cordis.patch.yml 里可以覆盖配置：

- id: dsh-mishu
  name: dsh-mishu
  config:
    home: ~/.mishu              # 记事本目录，在 DSH 之外
    language: auto              # auto（跟系统语言）/ zh / en
    github:
      enabled: true
      intervalMinutes: 15
      tokenEnv: GITHUB_TOKEN
      useGhCli: true
      markRead: shadow          # off / shadow / on
      markReadReasons: [merged, closed, recovered, superseded, ref-gone]
    leadDays: { document: 90, bill: 3, birthday: 7, renewal: 7, other: 1 }
    upcomingDays: 30            # 简报里"快到了"往后看多少天

记事本是 ~/.mishu/mishu.db（SQLite），只存元数据和简短备注，不存邮件正文和 token。在 macOS / Linux 上，这个目录只有你本人能读写。卸载插件不会删它。

还没做

• 推送到手机（渠道还没定）。现在简报只能在 DSH 里看。
• 规则认不出的通知（unclassified）先直接交给你，还没接模型。
• 飞书；邮件里的"你发出去没人回""你答应别人的事"（要读已发送文件夹）。
• Outlook / Hotmail：微软只允许 OAuth 登录 IMAP，暂不支持。
• Windows 和 Linux 的钥匙串已经按各自系统的方式实现，但还没在真机上测过。

收录渠道

• DSH Plugin Hub（dsh-plugin.org 社区插件市场）
• awesome-dsh-plugin 精选列表
• dsh-plugin-shop 插件商店（每日自动收录）
• 52DSH / tuofangzhe 插件目录（证据分级收录）

---

English

A secretary plugin for DeepSeek Harness (dsh). It watches your GitHub notifications and remembers the dated things you tell it (bills, renewals, document expiries, birthdays). It checks which of them are already resolved and closes those for you, so only what actually needs you stays on the list.

Runs on macOS, Windows and Linux. Speaks Chinese and English.

What it does

GitHub notifications: every 15 minutes it pulls all unread notifications and judges each one by the current state of what it is about, never by the notification text.

Dozens of notifications fold into a few items: all failures of one workflow on one branch are one item, and all noise from one fork is one item.

Things you tell it: in any DSH chat, say "my passport expires on 2027-03-10" or "rent is due on the 15th every month". The model works out the date, the repeat and how early to remind you; DSH shows an approval card with exactly what was understood, and nothing is saved until you approve it. On the reminder day the item appears on your list. When you say it is done, that occurrence closes and the next one appears on its own schedule.

Default warning times: documents 90 days, bills 3, birthdays 7, renewals 7, everything else 1.

Mail: add a mailbox on the settings page (QQ, 163, 126, Gmail, iCloud, or your own IMAP server) and the secretary looks at recent unread mail in your inbox. Read-only: the inbox is opened read-only; only sender, recipients, subject and a few headers are read — never the body — and nothing is marked read.

A thread of replies is one item. Once you read it in your mail client, its item closes by itself.

Passwords live in the system keychain: the macOS Keychain, Windows Credential Manager or the Linux keyring (Secret Service). You type a password once on the settings page; it goes straight to the keychain, is never written to a file and is never returned by any endpoint. On a computer without one (a Linux server with no desktop, say), passwords and tokens go to secrets.json in the notebook directory: mode 600, readable by your system account only, but not encrypted, and the settings page says so and why.

Adding a mail account: "+ Add a mail account" opens a short guide. The address picks the provider; it says where to turn on IMAP and get the app password, with a button that opens that page; it warns when the password has the wrong length; "Test and save" keeps only an account that connects.

Usage

The board: click "Secretary" in DSH's left sidebar to open a full-page board. On top: one summary sentence and four numbers (to handle, due in 7 days, closed today, to review). Below, three columns:

Filter the board by source: All, GitHub, Mail, Noted.

• To handle: what needs you now. Every card says what it is, where the problem is and what to do (for a failing CI: which job and step, when it last passed), and its main button opens the right place ("Open the failing log", "Turn off Actions", "Review it"), next to done, tomorrow and dismiss.
• Keeping for you: things you put off until tomorrow, and things you told it that are not due for a reminder yet. Add a new one at the bottom, with a live preview of what was understood.
• Done for you: what was closed in the last 7 days, grouped by reason. "What happened" shows what it was, why it was closed (with the evidence link), what the secretary did and which notifications it came from. Reopen any that are wrong.

+AI: when something is unclear, press the colourful "+AI". It opens a new chat with the item's explanation, link and related notifications in the input box — unsent — so you can read it, add your question and press send. Every card, the summary, source errors and each mail provider's setup note have one. In that chat the AI can use mishu_detail to look an item up in full, and asks you before changing anything.

Cards can be dragged: onto "Done for you" to mark done, onto "Keeping for you" to snooze until tomorrow, from "Keeping for you" back to "To handle" to handle it now. The dividers between the columns can be dragged too; double-click one to make the columns equal.

Settings: the "Settings" tab at the top of the page: language, warning days per category, GitHub (on/off, where the token comes from, connection test, how to mark read), mail accounts (add, test, check now, edit, delete). Feishu / Lark is coming.

Restart DSH: the button after "Settings" at the top of the page. After reinstalling or upgrading plugins, click it: the desktop app quits the normal way (asking first if a task is running) and opens again. On a server set up with dsh-vps, DSH runs under the dsh-gate gateway: DSH exits cleanly, the gateway starts it again within seconds, and the page reloads once it is back. DSH started directly with the dsh command cannot be restarted from the page (its new sign-in address is printed only in that terminal), so the button tells you to press Ctrl+C there and run it again. Restarting the Windows and Linux desktop apps is not yet tested on real machines.

Text commands:

/mishu                 brief: what needs you, what is coming up, what was closed for you
/mishu sync            sync GitHub now
/mishu done 12         mark #12 done (also: dismiss 12, reopen 12)
/mishu closed          items closed in the last 3 days, with reasons
/mishu series          things you told me that are still in play
/mishu stop 3          stop reminding series #3

Chinese commands work too: 同步, 完成, 忽略, 恢复, 已关闭, 交代, 停止, 帮助.

Tools for the agent: mishu_add (needs your approval), mishu_list, mishu_detail, mishu_update, mishu_stop.

What it will not do

• It does not mark anything read on GitHub by default. markRead starts as shadow: it records which notifications it would mark read and touches none. Check /mishu closed, then switch to on. Items still on your list are never marked read.
• Notification text never triggers an action. Only verified state does.
• Your own decision is not overturned by the same evidence. Only newer activity at the source re-opens the question.
• Reopening something a rule closed counts as a correction. A rule that has closed at least 10 items and been corrected on more than 20% of them is demoted: from then on its conclusions are shown to you instead of closing items.
• It does not touch your mailbox. Read-only: no bodies, no marking read, no deleting or moving, no sending.

GitHub token

It uses, in order, and never writes a token to a file:

1. an environment variable (default GITHUB_TOKEN)
2. a token from "Sign in with GitHub" on the settings page (GitHub's device flow: it shows a code you enter at github.com/login/device, from a phone or another computer if you like), or one you paste: checked with GitHub first, then kept in the system keychain (in secrets.json without one). Use a classic token with the notifications scope (plus repo for private repositories); GitHub's notifications API does not take fine-grained tokens
3. gh auth token: if the GitHub CLI is installed and you have run gh auth login. DSH started from the Dock or Start menu often gets a short PATH, so besides PATH the secretary looks for gh where Homebrew, ~/.local/bin, winget and Scoop put it

Install and configure

dsh plugin --profile <name> add dsh-mishu

Override settings in the profile's cordis.patch.yml (see the Chinese section for the full example; the keys are the same). language is auto (follow the system locale), zh or en.

The notebook is ~/.mishu/mishu.db (SQLite). It keeps metadata and short notes only, never email bodies or tokens. On macOS and Linux the directory is readable and writable by you alone. Uninstalling the plugin leaves it in place.

Not done yet

• Push to your phone (channels not chosen yet). For now the brief is only in DSH.
• Notifications the rules do not recognise (unclassified) are handed to you; no model triage yet.
• Feishu / Lark; "you sent it and nobody replied" and "things you promised" from mail (needs the Sent folder).
• Outlook / Hotmail: Microsoft only allows OAuth for IMAP; not supported yet.
• The Windows and Linux keychains are implemented the way each system documents, but not yet tested on real machines.

---

Development · 开发

npm install
npm test     # node:test runs the TypeScript directly (Node ≥ 22.18); the time zone is pinned in tests/setup.ts
npm run build
npm run record   # record a real, read-only sync of your own account into tests/fixtures/local/

Test data · 测试数据

• The committed tests use a made-up GitHub account built in tests/fixtures/synthetic.ts (example-org, upstream-org, demo-*): a fork running its parent's schedules, superseded release tags, recovered failures, a deleted branch, a red feature branch, a bot comment on a commit, PRs and issues in every state.
• 仓库里的测试只用编造的账号（tests/fixtures/synthetic.ts），覆盖所有规则要处理的情况。
• npm run record writes a recording of your own account to tests/fixtures/local/. Git ignores that folder; never commit it. When it exists, npm test also checks it (every notification judged, every closure has a known reason); when it does not, those checks are skipped.
• npm run record 录下的是你自己账号的真实数据，放在 tests/fixtures/local/，git 会忽略这个目录，绝不提交。本机有这份数据时，npm test 会多跑一组检查；没有就跳过。

src/core/          notebook, items, things you tell it, GitHub rules, brief, board, i18n — node: built-ins only, no DSH imports
src/core/github/   client (REST) → facts (current state) → rules (pure) → sync (fold into items)
src/dsh/           plugin shell: config, timers, /mishu, agent tools, approval gate, board API
src/client/        browser half: left-sidebar entry and the board page (React, bundled by scripts/build-client.mjs)

Test in a separate profile: npm pack, then dsh plugin --profile mishu-test add ./dsh-mishu-x.y.z.tgz with home: ~/.mishu-test.